LED Disco Ball Product Instructions

Once again, thanks for your purchase!

Note: We have also recorded a fine video instruction series that we thought you might enjoy. Enter your email and tell us where to send them.

Get Videos

_{Your information is 100% secure with us and will not be shared with any third parties. By opting to recieve these video instructions you consent to receiving email communications from NuLights and agree to the terms of our privacy policy, which you can read here}

Whatever the occasion may be, we hope you enjoy the LED Disco Ball as much as we do.

In most cases, maximum enjoyment can be achieved simply by plugging it in and playing some of your favorite tunes. However, it has some additional capabilities that we think will improve your experience overall.

 

Standard Mode (A1 - A7)

Standard Mode consists of 7 different settings: A1 through A7. Each mode has a speed selection of S1 through S9.

Press the Menu button until A1 is displayed.

 

You can then press the Up or Down buttons until you reach the desired speed.

 

You can cycle through A modes by pressing the Menu button again, as well as change the speed with Up or Down for each A mode.

A1S9

A2S9

A3S9

A4S9

A5S9

A6S9

A7S9

 

Sound Activated Mode (S1 through S2)

You can put the LED Disco Ball in Sound Activated mode (by far one of our favorite modes) by pressing the Menu button until the display reads S1 or S2.

Sound Activated mode doesn’t have adjustable speed like A1 through A7, but S1 and S2 both have 20 different individual patterns, indicated by 1 through 20.

You can cycle through patterns by pressing either the Up or Down buttons.

If neither button is pressed, the LED Disco Ball will slowly cycle through the patterns on its own.

 

XLR Audio Input Mode (AXXX)

This mode is used in conjunction with the XLR input on the back of the LED Disco Ball.

In XLR Audio Input mode, the LED Disco Ball will utilize the XLR connection as the primary source for sound responsiveness, in place of the built-in microphone.

Press the Menu button until A001 is displayed.

The LED Disco Ball is now using the XLR connection for sound responsiveness.